Gorbel End of Arm Tooling
These tooling devices are high speed, high precision, intelligent lifting devices that often require end tooling to complete a total solution. End-effector tooling engages the load so it can be lifted and manipulated in whatever way your application requires, whether the load needs to be flipped, turned, or rotated.
End of Arm Tooling
![]() |
OD Gripper This OD Gripper features a remotely mounted pendant handle for gripping wheel and tire assemblies. Utilizes the anti-drop intelligence feature of iQ model which doesn’t allow the release of the load in the air. |
![]() |
Plate Gripper This plate gripper features a vertical to horizontal pitch function. In-line slide handle. This end-effector may be used for steel plates or any other material. |
![]() |
Box or Bucket Lifter This bucket lifter utilizes vacuum cups with force sensing hub grips from side and top of boxes or buckets to maintain the integrity of the package and allow high and low layer palletizing/de-palletizing. |
![]() |
Two Jaw Gripper Remote pendant handle integrated pneumatic gripper, with manual rotate and adjustable center of gravity. Jaws can be customized to fit the geometry of any part. |
![]() |
Tube Lifter This tube lifter uses a permanent magnet with pneumatic release to safely lift products. This end-effector also works with any round ferrous bar stock or cylindrical objects. |
![]() |
Plate/Sheet Lifter This end-effector uses a permanent magnet with pneumatic release. The size of magnets and configuration of the magnet array can be customized to fit larger ferrous plates or sheets. |
![]() |
Casting Lifter This end-effector magnetically grips and lifts coated metal castings from moulds. This casting lifter also includes a feature that uses high-pressure air to release the part from the mould. |
![]() |
Plate Picker The extended remote mounted pendant handle of this end-effector allows reaching over a plasma cutting table to remove cut parts or other applications where an extended reach is needed. |
![]() |
Drum Lifter This end-effector uses force sensing hub to vacuum with a quick-change adapter and 3 different vacuum heads to lift drums, bags, and cardboard boxes with the same system. |
![]() |
Plate Picker This end-effector utilizes a magnet gripper with air-actuated release and force sensing handle allows lifting and lowering without bending over to pick or place the load. |
![]() |
Vacuum Clamp This two-cup vacuum tool on two linear actuators uses both clamping and vacuum to pick or place cabinets, enclosures, or other large box-type loads. |
![]() |
Spool Gripper This pneumatic OD clamp end effector has a remotely mounted pendant handle that grips spools of wire, cable or other materials. The pitch function of this end-effector positions the spool horizontally or vertically. |
![]() |
ID Gripper This pneumatic two-jaw ID gripper has an automatic (button-less) clamp/unclamp function that combines well with the Force Sensing Hub for high-speed pick and place applications. |
![]() |
Wheel Lifter Remote pendant handle pairs of this wheel lifter has a pneumatic OD gripper to lift and move car, truck, or heavy equipment wheels. |
![]() |
Tire / Wheel Picker This end-effector has an expanding air bladder is attached to an automatic clamp/unclamp unit with the Force Sensing Hub to pick and place wheels, with or without tires. Dual handles allow ergonomic high/low lifting. |
![]() |
Pneumatic Clamp This versatile clamping tool with in-line slide handle grips any load with flat sturdy sides such as car batteries, blocks, or metal blanks. |
![]() |
Bin Lifter This bin lifter gripper has a remotely mounted pendant handle that has rotate function to allow lifting and dumping of bins. |
![]() |
Roll Turner This simple non-powered, mechanical ID roll lifter engages the core of the roll. This end-effector has a remotely mounted slide handle, this unit also effortlessly rotates from vertical to horizontal. |
![]() |
Sleeve Picker This end-effector has a manually actuated ball-lock pin which engages the steel sleeve for lifting and is paired with a remote mount slide handle. |
![]() |
Manual Tong This end effector is a flexible three-way tong which grabs with in-line slide handle allows lifting of a range of different diameter loads. |
Additional Resources:
![]() |
![]() |
![]() |
![]() |
View Our Photo Gallery |
View Our Video Gallery |
View Online Catalogue |
Meet Our Product Partners |
You must be logged in to post a comment.